MAKE A CHANGE When replacement graphics are required for traditional roller banners, a customer is usually faced with two options. A banner can either be returned to the supplier for a new graphic to be applied or simply “thrown away” and a new one purchased. Each can be time consuming, costly or just not good for our environment. Link² banners provide a fresh new approach. You simply keep Link² hardware indefinitely and change the graphics as many times as you like. Just order a replacement graphic and attach it to the mechanism using our “easy-change” process. The older graphic can be stored for future use if needed. REPLACING GRAPHICS HAS NEVER BEEN SO EASY 1. To stop a graphic from retracting insert a locking pin into the base of the Link². 2. Unhook the finishing bar from the roller mechanism and then carefully remove the complete graphic and store accordingly. 3. Hook the replacement graphic to the Link² top cap. Pull the graphic down and hook on to the roller banner mechanism. 4. Remove the locking pin and then unhook the graphic from the top cap so that the graphic can retract into its base.
RkJQdWJsaXNoZXIy NDMwODk0